I think its supposed to say "I Lug 150 Pound Hogs" but what the heck.
Monday, July 28, 2014
Saturday, July 26, 2014
Shhhhhhhhhh !
A few months ago, I started a project to build a device that would allow me to test fire loads in the back yard without the neighbors thinking I was blasting stumps or something. Like most of my projects, I shelved it for work or other projects that caught my fancy. I picked it up again today and boy am I pleased with the results!
I read somewhere that people were using gas bottles for this purpose. Whatever I read didn't give any details. It just sounded like they'd unscrew the valve, stick the gun's muzzle in the hole and blast away. I wasn't really comfortable with that because I've seen what a 30-06 can do to a piece of steel even when its angled at 45 degrees and I just couldn't see how the bottom end of the bottle could take rifle fire for very long. Its probably an inch thick but even that would give way pretty quickly if it had to stop rifle bullets.
By comparison to just unscrewing the valve, my solution was overly complex and much more difficult and costly to manufacture. I simplified it quite a bit today.
The first concept was something that I would shoot through. To manage that, I cut about three inches off the bottom end of the bottle to give me access to the cylinder's interior so I could install my ingenious muffler and baffle system. I bored a hole in the center of the piece that I cut off to allow the bullets to pass through. The idea was to install the innards and then reattach the bottom using a thick gasket and a series of turnbuckles to snug it all up.
I finally ditched the whole idea of keeping the bottom piece in the plans and decided to just let it go commando because I just couldn't see how I'd be able to line up the gun barrel consistently enough to get the bullet through the hole in the far end every time.
The resulting components looked like this.
The innards were selected via strict scientific parameters for performance and durability, and because I already had them lying around in the shed. The baffles are made of poplar and the muffler is a Thrush glass pack that spent about one weekend on Ruth, the Jeep.
The baffles go on each end of the muffler and the whole works goes inside the cylinder. Then the open end of the bottle gets slammed into the dirt mound. The shootin' end is supported by an old transmission housing - again courtesy of good old Ruth. I did say I simplified it.
This was a temporary setup to test whether the concept would work so I didn't spend a lot of time building a permanent version just to find out that it didn't. The shootin' hole is still threaded for the valve too so I had to be extra careful with the rifle barrel during testing.
The rifle is a Cooper Model 38 in 22 Cooper Centerfire Magnum. Less than a 22 Hornet but more than a 22 Winchester Magnum Rimfire. I chose it for the testing because I didn't see any sense in starting out with something huge in case the project would work on a small cartridge but be overtaxed by a big one. I also chose it because its barrel would fit the opening in the bottle and it's the rifle that drove me to building this whole setup in the first place.
I have a problem loading the ammo. Even with a starting load and the exact bullets called for in the data, when I seat the bullet it compresses the heck out of the powder. Several things happen. Since the brass is incredibly thin, the brass expands and lets go of the bullet. Sometimes the bullet cocks to one side and the round won't chamber. The bullet also creeps out far enough to interfere with feeding from the magazine and with chambering the round.
22 CCM loading data is rather sparse and I want to go with a powder that is a tad quicker than the WW 296 that I love so dearly so I need to be able to work up a load on my own. Can't work up a load without test firing. Don't want to frighten the neighbors either so its drive 30 minutes to the river, drive an hour to the range or build something to contain the sound.
I put electrical tape on the barrel to protect the finish. The fatter portion with the tape on it has a thin slice of cork under the tape to act as a gasket. The barrel slides into the shootin' hole far enough that the muzzle is actually inside the cherry bomb muffler and the cork protects the barrel and makes a seal.
I said I was pleased with the results. When I fired the rifle, the sound was barely audible. My feet crushing the damp leaves made more noise than the shot did. It was more of a "poof" than a "pop" or a "bang." I couldn't believe it.
I opened the bolt and out came the empty case. I held the muzzle upright and shook the rifle expecting unburnt powder to come out. Nothing did. I looked down the barrel and saw light. I still couldn't reconcile the lack of sound with the thing actually having fired so I ran a cleaning rod through the barrel just to make extra sure. Sure enough, it came out the breech without having to push anything out of the way. I tested it again and got the same results.
This could be as big or even bigger than my portable reloading setup.
I read somewhere that people were using gas bottles for this purpose. Whatever I read didn't give any details. It just sounded like they'd unscrew the valve, stick the gun's muzzle in the hole and blast away. I wasn't really comfortable with that because I've seen what a 30-06 can do to a piece of steel even when its angled at 45 degrees and I just couldn't see how the bottom end of the bottle could take rifle fire for very long. Its probably an inch thick but even that would give way pretty quickly if it had to stop rifle bullets.
By comparison to just unscrewing the valve, my solution was overly complex and much more difficult and costly to manufacture. I simplified it quite a bit today.
The first concept was something that I would shoot through. To manage that, I cut about three inches off the bottom end of the bottle to give me access to the cylinder's interior so I could install my ingenious muffler and baffle system. I bored a hole in the center of the piece that I cut off to allow the bullets to pass through. The idea was to install the innards and then reattach the bottom using a thick gasket and a series of turnbuckles to snug it all up.
I finally ditched the whole idea of keeping the bottom piece in the plans and decided to just let it go commando because I just couldn't see how I'd be able to line up the gun barrel consistently enough to get the bullet through the hole in the far end every time.
The resulting components looked like this.
The innards were selected via strict scientific parameters for performance and durability, and because I already had them lying around in the shed. The baffles are made of poplar and the muffler is a Thrush glass pack that spent about one weekend on Ruth, the Jeep.
The baffles go on each end of the muffler and the whole works goes inside the cylinder. Then the open end of the bottle gets slammed into the dirt mound. The shootin' end is supported by an old transmission housing - again courtesy of good old Ruth. I did say I simplified it.
This was a temporary setup to test whether the concept would work so I didn't spend a lot of time building a permanent version just to find out that it didn't. The shootin' hole is still threaded for the valve too so I had to be extra careful with the rifle barrel during testing.
The rifle is a Cooper Model 38 in 22 Cooper Centerfire Magnum. Less than a 22 Hornet but more than a 22 Winchester Magnum Rimfire. I chose it for the testing because I didn't see any sense in starting out with something huge in case the project would work on a small cartridge but be overtaxed by a big one. I also chose it because its barrel would fit the opening in the bottle and it's the rifle that drove me to building this whole setup in the first place.
I have a problem loading the ammo. Even with a starting load and the exact bullets called for in the data, when I seat the bullet it compresses the heck out of the powder. Several things happen. Since the brass is incredibly thin, the brass expands and lets go of the bullet. Sometimes the bullet cocks to one side and the round won't chamber. The bullet also creeps out far enough to interfere with feeding from the magazine and with chambering the round.
22 CCM loading data is rather sparse and I want to go with a powder that is a tad quicker than the WW 296 that I love so dearly so I need to be able to work up a load on my own. Can't work up a load without test firing. Don't want to frighten the neighbors either so its drive 30 minutes to the river, drive an hour to the range or build something to contain the sound.
I put electrical tape on the barrel to protect the finish. The fatter portion with the tape on it has a thin slice of cork under the tape to act as a gasket. The barrel slides into the shootin' hole far enough that the muzzle is actually inside the cherry bomb muffler and the cork protects the barrel and makes a seal.
I said I was pleased with the results. When I fired the rifle, the sound was barely audible. My feet crushing the damp leaves made more noise than the shot did. It was more of a "poof" than a "pop" or a "bang." I couldn't believe it.
I opened the bolt and out came the empty case. I held the muzzle upright and shook the rifle expecting unburnt powder to come out. Nothing did. I looked down the barrel and saw light. I still couldn't reconcile the lack of sound with the thing actually having fired so I ran a cleaning rod through the barrel just to make extra sure. Sure enough, it came out the breech without having to push anything out of the way. I tested it again and got the same results.
This could be as big or even bigger than my portable reloading setup.
The Book of Barkley - A Comment
I offered this as a comment on Brigid's blog and then decided to put it here, slightly edited, as a post as well. This isn't exactly a review of the book.
The Book of Barkley came out Thursday night and I ordered a copy on Friday Morning. It was slow at work and my belly was whispering "remember the diverticulitis?" so I downloaded the e-book and went home. I finished it last evening.
Last night I dreamed of the time our Labs, OJ and Nicole, discovered their first skunk and came running back in the house dripping skunk juice. Then I dreamed of hanging out with old friends. When I woke up this morning, I thought back to a few weeks ago when I was so concerned about my self-destructive friend. The preacher prayed that God would put people in her life that would help her. The thought that I had this morning was that I bet one of those people will be a big, Black Lab.
I believe it was Jerry Clower who said "You've never been loved 'till you've been loved by a dog." I never thought I'd ever be able to do justice to the impact the love of that one special dog can have on a person's life.
I think Brigid has done that.
If you are a dog person, you will understand. If you are a cat person, prepare to be converted.
I think I will go invest in a kennel that raises Labs. Their price should start going up any day now.
The Book of Barkley came out Thursday night and I ordered a copy on Friday Morning. It was slow at work and my belly was whispering "remember the diverticulitis?" so I downloaded the e-book and went home. I finished it last evening.
Last night I dreamed of the time our Labs, OJ and Nicole, discovered their first skunk and came running back in the house dripping skunk juice. Then I dreamed of hanging out with old friends. When I woke up this morning, I thought back to a few weeks ago when I was so concerned about my self-destructive friend. The preacher prayed that God would put people in her life that would help her. The thought that I had this morning was that I bet one of those people will be a big, Black Lab.
I believe it was Jerry Clower who said "You've never been loved 'till you've been loved by a dog." I never thought I'd ever be able to do justice to the impact the love of that one special dog can have on a person's life.
I think Brigid has done that.
If you are a dog person, you will understand. If you are a cat person, prepare to be converted.
I think I will go invest in a kennel that raises Labs. Their price should start going up any day now.
Friday, July 25, 2014
The Book of Barkley is Out!
They say that you really die twice. The day your body gives up and then again when your name is spoken for the last time.
On December 11, 2008, the best dog that I ever had succumbed to Lymphoma. I had always had Labs and for 30 years they had always been black Labs. When he died, I couldn't get another. It wouldn't have been fair to the new dog to look like O.J. but not be O.J.
That evening, I started writing down notes about silly things that O.J. had done over the years, about unusual mannerisms that he had like popping his jaws like an angry bear when he was excited and a whole lot about how he seemed to be made of pure love. I couldn't stand the thought that his memory would fade away and even that would be gone one day. I thought I might write a long post here or maybe even a book so he'd always be out there in someone's library somewhere.
I had page after page of notes but didn't write anything more.
A year or two later, I was inspecting a house that was being sold by an Estate. They had just finished the Estate sale and the place was full of stuff that nobody wanted. On the kitchen table, a painting of a black Lab in some tall grass by a pond stuck out from under the rest of the unwantable rummage. It was amateurish. Certainly not anything you'd hang up in your living room but it reminded me of my notes and why I took them. Someone had painted it. Probably the deceased homeowner or maybe a spouse or a grandkid. It was a painting of somebody's black Lab and somebody cared enough about the dog to paint it. It was all that was left of one dog's life and an important part of a person's.
The painting had a piece of tape on it that said "$1.00." Nobody had wanted it for even one dollar. I thought about taking it and leaving a dollar on the counter but the sale was over and nobody was there but me so, technically, I couldn't buy it. Besides, what if the heirs had decided to keep it? Maybe it wasn't for sale anymore. One doesn't stay in a business that involves going into peoples' homes very long by being a thief. I decided to call the realtor to find out the next morning.
The realtor told me that I should have just taken the painting because the heirs had already hired a crew to clean the place out and everything would be thrown away later that day. I went by after work to see if they were still there but the place was empty. That black Lab died his second time that day.
Still, I didn't write anything about O.J. Its just not easy. Besides missing him, there's the question of talent. I have too much of the missing and not enough of the talent.
Thankfully, when Barkley died, Brigid didn't let him just fade away. The Book of Barkley is now published and available as an e-book or an analog version from Amazon or Barnes and Noble. She has this link on her blog where you can get them. Amazon says they are temporarily out of stock so I back ordered a paper copy and then bought the e-book too. If you haven't been reading the excerpts she's been posting on her blog, you might think its just another book about a dog but its not. Its so much more this talentless old fart can't begin to explain it. I won't even try. Just go buy the book. You'll see.
On December 11, 2008, the best dog that I ever had succumbed to Lymphoma. I had always had Labs and for 30 years they had always been black Labs. When he died, I couldn't get another. It wouldn't have been fair to the new dog to look like O.J. but not be O.J.
That evening, I started writing down notes about silly things that O.J. had done over the years, about unusual mannerisms that he had like popping his jaws like an angry bear when he was excited and a whole lot about how he seemed to be made of pure love. I couldn't stand the thought that his memory would fade away and even that would be gone one day. I thought I might write a long post here or maybe even a book so he'd always be out there in someone's library somewhere.
I had page after page of notes but didn't write anything more.
A year or two later, I was inspecting a house that was being sold by an Estate. They had just finished the Estate sale and the place was full of stuff that nobody wanted. On the kitchen table, a painting of a black Lab in some tall grass by a pond stuck out from under the rest of the unwantable rummage. It was amateurish. Certainly not anything you'd hang up in your living room but it reminded me of my notes and why I took them. Someone had painted it. Probably the deceased homeowner or maybe a spouse or a grandkid. It was a painting of somebody's black Lab and somebody cared enough about the dog to paint it. It was all that was left of one dog's life and an important part of a person's.
The painting had a piece of tape on it that said "$1.00." Nobody had wanted it for even one dollar. I thought about taking it and leaving a dollar on the counter but the sale was over and nobody was there but me so, technically, I couldn't buy it. Besides, what if the heirs had decided to keep it? Maybe it wasn't for sale anymore. One doesn't stay in a business that involves going into peoples' homes very long by being a thief. I decided to call the realtor to find out the next morning.
The realtor told me that I should have just taken the painting because the heirs had already hired a crew to clean the place out and everything would be thrown away later that day. I went by after work to see if they were still there but the place was empty. That black Lab died his second time that day.
Still, I didn't write anything about O.J. Its just not easy. Besides missing him, there's the question of talent. I have too much of the missing and not enough of the talent.
Thankfully, when Barkley died, Brigid didn't let him just fade away. The Book of Barkley is now published and available as an e-book or an analog version from Amazon or Barnes and Noble. She has this link on her blog where you can get them. Amazon says they are temporarily out of stock so I back ordered a paper copy and then bought the e-book too. If you haven't been reading the excerpts she's been posting on her blog, you might think its just another book about a dog but its not. Its so much more this talentless old fart can't begin to explain it. I won't even try. Just go buy the book. You'll see.
Thursday, July 24, 2014
Chicago, Not My Kind of Town
Yes, I know its not the same car. Its the fact that it really could be that's telling.
Wednesday, July 23, 2014
History Changes
When I was in college, I took a class on being a historian. One of the first things the yankee teacher said was that history changes. You have to write what people want to hear or you'll never get published and never get hired.
That's a big part of how we got to where we are today from the truth.
Here's a little bit of suppressed truth from way back:
On April 25, 1861 over three hundred free Blacks, and a few slaves "volunteered" by their owners, left Petersburg by train for labor service on the fortifications of Norfolk with their own Confederate flag, and leader."
"We are willing to aid Virginia's cause to the utmost of our ability. There is not an unwilling heart among us, not a hand but will tell in the work before us, and we promise unhesitating obedience to all orders that may be given us." -- Charles Tinsley, Free Black, Pocahontas, Petersburg, Va.
That's a big part of how we got to where we are today from the truth.
Here's a little bit of suppressed truth from way back:
On April 25, 1861 over three hundred free Blacks, and a few slaves "volunteered" by their owners, left Petersburg by train for labor service on the fortifications of Norfolk with their own Confederate flag, and leader."
"We are willing to aid Virginia's cause to the utmost of our ability. There is not an unwilling heart among us, not a hand but will tell in the work before us, and we promise unhesitating obedience to all orders that may be given us." -- Charles Tinsley, Free Black, Pocahontas, Petersburg, Va.
"Realizing that many free Black households would be in want following
the departure of their husbands on voluntary work, the Petersburg City
Council voted family assistance funds for wives and children left
behind. Such assistance continued for the length of the war."
~Robert~
Mayor Dodson presented them with a Confederate flag and promised the men that they would "...reap a rich reward of praise and merit from a thankful people.
From Defending The Heritage's Facebook Page
~Robert~
Mayor Dodson presented them with a Confederate flag and promised the men that they would "...reap a rich reward of praise and merit from a thankful people.
From Defending The Heritage's Facebook Page
Tuesday, July 22, 2014
In-A-Gadda-Da-Vida or Something Like That
From Florida Fringe Tourism
The Garden of Eden
If you thought the Garden of Eden was somewhere in the Middle East, guess again. It was in Bristol Florida all this time … or so the story goes. According to Baptist preacher Elvy E. Callaway, Bristol is the home town of Adam and Eve. As farfetched as this may sound, Rev. Callaway may have been on to something.
In the 1950s, Callaway discovered a significant number of features in Bristol that matched the Bible’s description of the Garden of Eden. He pointed out that Genesis 2:10 states "a river went out of Eden to water the garden; and from hence it was parted, and became into four heads." That matches the description of the Apalachicola River, which splits into four rivers. The Reverend claimed that only two rivers in the world fit the Bible’s description: the Apalachicola, and one in Siberia (where it’s obviously too cold for the Garden of Eden!) Callaway also identified 28 species of trees mentioned in the Bible, trees that are found very few other places in the entire world.
The rest of the article is at the link.
Of course, few men my age can think of "Eden" without thinking of Barbara:
I guess that's a whole 'nuther story though.
The Garden of Eden
If you thought the Garden of Eden was somewhere in the Middle East, guess again. It was in Bristol Florida all this time … or so the story goes. According to Baptist preacher Elvy E. Callaway, Bristol is the home town of Adam and Eve. As farfetched as this may sound, Rev. Callaway may have been on to something.
In the 1950s, Callaway discovered a significant number of features in Bristol that matched the Bible’s description of the Garden of Eden. He pointed out that Genesis 2:10 states "a river went out of Eden to water the garden; and from hence it was parted, and became into four heads." That matches the description of the Apalachicola River, which splits into four rivers. The Reverend claimed that only two rivers in the world fit the Bible’s description: the Apalachicola, and one in Siberia (where it’s obviously too cold for the Garden of Eden!) Callaway also identified 28 species of trees mentioned in the Bible, trees that are found very few other places in the entire world.
The rest of the article is at the link.
Of course, few men my age can think of "Eden" without thinking of Barbara:
I guess that's a whole 'nuther story though.
Monday, July 21, 2014
Mondays
Sometimes you're the dog. Sometimes you're the hog.
Today I am the dog.
Photo from the the Marsh Mafia's Facebook page.
Saturday, July 19, 2014
Thursday, July 17, 2014
Sunday, July 13, 2014
Nice Rack
At my weekly sojourn to the local Goose Berg, I noticed this little pistol rack.
Its supposed to go in your safe; your Liberty Safe; but I liked the idea of using it on my night stand. The drawer was what did it because it will keep the spare magazines, speed loaders and maybe even a small Sure Fire flashlight from getting mixed in with the car keys, spare change and whatever books I'm reading.
The rack is a typical vinyl coated metal rack. It has four prongs that hold the guns. You just slide the barrel down over a prong and there's your gun. We don't have any kids in the house so keeping a loaded gun like that isn't a problem here.
The writing on the box talks about keeping the guns ready for a quick draw and I suppose it would be quicker than fumbling through everything on the night stand to get to the gun. I mean, that is why I thought it was worth the thirty bucks I spent on it. The funny thing is that the box also says its not for loaded guns. I haven't figured out why I'd ever need to quickly draw an unloaded gun but that's OK. I tested the weight capacity of the rods. They will hold handguns from .25 ACP (maybe even .22) to .45 Colt and they will hold those guns while they are loaded.
Its supposed to go in your safe; your Liberty Safe; but I liked the idea of using it on my night stand. The drawer was what did it because it will keep the spare magazines, speed loaders and maybe even a small Sure Fire flashlight from getting mixed in with the car keys, spare change and whatever books I'm reading.
The rack is a typical vinyl coated metal rack. It has four prongs that hold the guns. You just slide the barrel down over a prong and there's your gun. We don't have any kids in the house so keeping a loaded gun like that isn't a problem here.
The writing on the box talks about keeping the guns ready for a quick draw and I suppose it would be quicker than fumbling through everything on the night stand to get to the gun. I mean, that is why I thought it was worth the thirty bucks I spent on it. The funny thing is that the box also says its not for loaded guns. I haven't figured out why I'd ever need to quickly draw an unloaded gun but that's OK. I tested the weight capacity of the rods. They will hold handguns from .25 ACP (maybe even .22) to .45 Colt and they will hold those guns while they are loaded.
Adapt and Overcome With a 110 Year Old FE Reed Lathe
I suppose the lathe might even be 120 years old.
Anyway, I've got this Evil Black Rifle with a 50 Beowulf upper and I've never found a scope that I liked on it. I bought a red dot sight from a friend and he threw in an old Russian-made scope that was collecting dust in his gun room.
The scope is an ATN 5x33LU and has a ballistic compensator mechanism. It came with five or six discs to match the trajectories of different cartridges. None of them was for 50 Beowulf but that didn't really bother me. The rifle is a swamp gun for hogs and such. I'm not going to be sniping elk across a canyon with it.
I had a 4x Pentax on the EBR and it just didn't look right. The little Pentax would look a lot better on an optically-challenged Savage 99 that I have in the safe so I finally decided to put the big Russian scope on the AR and the Pentax on the Savage. The only hitch was that the Russian one is a 30mm scope and I had no rings for it.
I looked on line and never found anything that I wanted to pay shipping on but noticed a set of Weaver rings at the local Goose Berg this morning. I figured I'd just get them and make the swap on both rifles. It almost worked right out of the package.
The plan went awry because these particular rings were Tacticool rings that use six screws on each cap instead of two or four. The cap is an inch thick and there wasn't a whole inch between the scope's turret and the optical lens bell.
I had it in my mind that I was going to put that scope on the EBR today and I didn't want to shelve the project again. Besides that, The Lovely Bride went out last weekend and bought a deep freezer. I gotta go get something to put in the stupid freezer so I got to studying on how much metal I'd need to remove from the ring to make it fit between the two bulges in the scope. It looked like a pretty substantial chamfer on both ends would do it so I snugged it up in the ol' lathe's four jaw chuck and commenced to beveling the edges.
It actually worked pretty well.
Now I have two rifles that need to be sighted in all over again. Not a bad problem to have as long as you have more than two rifles.
The previous owner painted the scope green but I don't hate it that way. One thing that I really like about this scope is that I absolutely can't see a thing through it if I'm looking through my glasses but the reticle and the target are both in perfect focus if I look over my glasses.
That's important because I have gradient lenses and it means I won't have to waste time trying to find the sweet spot where my glasses focus at whatever range it is where the given pig is standing before I can shoot. Another thing that I like is that the reticle is lighted. Its black when the light is off and its red when its on. It has a rheostat to adjust the brightness and it really stands out against the palmettos. On top of all that, its built like a Stalin Tank. The recoil of an unbraked 50 Beowulf can be a little rude and the extra weight won't hurt.
Anyway, I've got this Evil Black Rifle with a 50 Beowulf upper and I've never found a scope that I liked on it. I bought a red dot sight from a friend and he threw in an old Russian-made scope that was collecting dust in his gun room.
The scope is an ATN 5x33LU and has a ballistic compensator mechanism. It came with five or six discs to match the trajectories of different cartridges. None of them was for 50 Beowulf but that didn't really bother me. The rifle is a swamp gun for hogs and such. I'm not going to be sniping elk across a canyon with it.
I had a 4x Pentax on the EBR and it just didn't look right. The little Pentax would look a lot better on an optically-challenged Savage 99 that I have in the safe so I finally decided to put the big Russian scope on the AR and the Pentax on the Savage. The only hitch was that the Russian one is a 30mm scope and I had no rings for it.
I looked on line and never found anything that I wanted to pay shipping on but noticed a set of Weaver rings at the local Goose Berg this morning. I figured I'd just get them and make the swap on both rifles. It almost worked right out of the package.
The plan went awry because these particular rings were Tacticool rings that use six screws on each cap instead of two or four. The cap is an inch thick and there wasn't a whole inch between the scope's turret and the optical lens bell.
I had it in my mind that I was going to put that scope on the EBR today and I didn't want to shelve the project again. Besides that, The Lovely Bride went out last weekend and bought a deep freezer. I gotta go get something to put in the stupid freezer so I got to studying on how much metal I'd need to remove from the ring to make it fit between the two bulges in the scope. It looked like a pretty substantial chamfer on both ends would do it so I snugged it up in the ol' lathe's four jaw chuck and commenced to beveling the edges.
It actually worked pretty well.
Now I have two rifles that need to be sighted in all over again. Not a bad problem to have as long as you have more than two rifles.
The previous owner painted the scope green but I don't hate it that way. One thing that I really like about this scope is that I absolutely can't see a thing through it if I'm looking through my glasses but the reticle and the target are both in perfect focus if I look over my glasses.
That's important because I have gradient lenses and it means I won't have to waste time trying to find the sweet spot where my glasses focus at whatever range it is where the given pig is standing before I can shoot. Another thing that I like is that the reticle is lighted. Its black when the light is off and its red when its on. It has a rheostat to adjust the brightness and it really stands out against the palmettos. On top of all that, its built like a Stalin Tank. The recoil of an unbraked 50 Beowulf can be a little rude and the extra weight won't hurt.
Saturday, July 12, 2014
Tuesday, July 8, 2014
Factory Crimp Die Video Instructions
A year or so ago, I posted a still picture of the one in blue and called it a new factory crimp die.
Leave it to Uncle Bubba to find a GIF with three of them and all at different crimp settings.
Leave it to Uncle Bubba to find a GIF with three of them and all at different crimp settings.
Monday, July 7, 2014
The Complete Illustrated Guide to Precision Rifle Barrel FItting
A couple of weeks ago, a place where I have bought a few pieces and parts for old guns sent me an email saying that they had John L. Hinnant's book by that name on sale. The book looked good but when I went to check out and pay for it, they had added $12.50 for shipping and handling. $12.50. You'd think it was The Complete Illustrated Guide to Understanding Women for it to cost that much to ship it.
So I looked in a few other places and managed to pay less in total by paying more for the book at a place with more reasonable shipping. I payed close to $6.00 less.
The book came in last week and I've had a chance to thumb through it. I really like what I see. Some of the reviews on line said you'd need some basic competency as a machinist to understand all of it but I don't think that's the case. I certainly don't know my way around a machine shop. There's no place around where I live to enroll in a class to learn how to run a lathe. What little I do know has been self taught or just picked up intuitively as I fiddle with old tools. I find the book to be pretty easy to understand even at my advanced level of ignorance.
The illustrations are all of the same quality as the one on the cover. Very clear and precise. The author tells you how to perform a given operation and tells you why to do it the way he says and why not to do it other ways. When more than one way does work, he tells you that too. He tells you where to get certain tools and how to make others and he tells you why you need what he says you need.
If you have an interest in gunsmithing but don't really have the knowledge you need, I think this book will really help.
My copy even came autographed.
About the only thing it leaves out is where you can get a bolt bending fixture like this.
I suspect that The Lovely Bride doesn't want one of those hanging around in the garage anyway.
I've been trying to find an excuse to post that picture for years!
Police Shoot Somebody's Dog Every 98 Minutes
All that "Protecting and Serving."
http://www.wnd.com/2014/07/police-take-horrific-action-every-98-minutes/
http://www.wnd.com/2014/07/police-take-horrific-action-every-98-minutes/
Sunday, July 6, 2014
Saturday, July 5, 2014
USS North Carolina v/s USS Kidd Friendly Fire Incident
When I was maybe three or four years old, we visited the USS North Carolina at Wilmington NC. It was a pretty new memorial back then and didn't have the fancy show or the Kingfisher.
I always thought I knew the ship's history fairly well but I'd never heard of this incident or the one where the NC was the recipient of friendly fire.
Nobody got hurt in this one and its a funny story with a twist at the end. Definitely worth reading.
http://usskidd.com/remem-661WW2-a.html
I always thought I knew the ship's history fairly well but I'd never heard of this incident or the one where the NC was the recipient of friendly fire.
Nobody got hurt in this one and its a funny story with a twist at the end. Definitely worth reading.
http://usskidd.com/remem-661WW2-a.html
Friday, July 4, 2014
True
Every year I save up a collection of pictures and gifs of girls in red, white and blue bikinis, US flag towels, US flags and so forth for today. Every year I feel less like celebrating.
Thursday, July 3, 2014
Confuser Trouble
Installed Avast anit-virus on my office computer this morning. The free version wants to install three or four additional programs and I missed declining one of them so I wound up with some stupid cartoon head at the top of my page to remind me that whatever I just installed had free tech support. Whatever the program was, it had installed and started running before the installation of the Avast, a/k/a the thing I was actually trying to install, had even started. It ran some kind of scan and said I had all kinds of problems with my computer's performance.
When it rebooted, the computer wouldn't start the first time couple of times. When it finally did start it was incredibly slow and unstable. It had also changed my home page to something I never heard of. I don't like programs that do any of that so I decided to uninstall the extra one. Naturally, it wouldn't uninstall. It said the file was corrupted and wanted me to reinstall it so it could uninstall it. I reinstalled it and it still wouldn't let me uninstall it.
To make a long, boring story more monotonous, I wound up reinstalling and uninstalling and rebooting in safe mode for over an hour and it finally took a system restore to get rid of the "corrupted" file.
Golly gee, with the performance-enhancing program uninstalled, the computer is running as fast as lightening again.
So ended my experiment with Avast.
Maybe a picture of some hot cleavage will make it all better:
That's Hot.
When it rebooted, the computer wouldn't start the first time couple of times. When it finally did start it was incredibly slow and unstable. It had also changed my home page to something I never heard of. I don't like programs that do any of that so I decided to uninstall the extra one. Naturally, it wouldn't uninstall. It said the file was corrupted and wanted me to reinstall it so it could uninstall it. I reinstalled it and it still wouldn't let me uninstall it.
To make a long, boring story more monotonous, I wound up reinstalling and uninstalling and rebooting in safe mode for over an hour and it finally took a system restore to get rid of the "corrupted" file.
Golly gee, with the performance-enhancing program uninstalled, the computer is running as fast as lightening again.
So ended my experiment with Avast.
Maybe a picture of some hot cleavage will make it all better:
That's Hot.
